Products

Din Rail Mounting Pluggable Relay 100,000,000 Mechanical operations minimum. 200,000 Electrical operations minimum. Operating Temperature : 0 to 50 degree Celsius. Storage Temperature: -10 to 60 degree Celsius. Relative Humidity : 5 to 85% RH. Relay ON Indication : Green color LED. Designation: Designation plate screwed to the PCB for Labeling purpose.

Din Rail Mounting Pluggable Relay 100,000,000 Mechanical operations minimum. 200,000 Electrical operations minimum. Relays (Standard/Approvals) : CSA Certified : UL Recognized. : EN, TUV Certified. Terminals (Standard/Approvals) : EN, TUV Certified : UL Canadian Approval. : RoHS COC. : CE Approval by UL1. : NO CE Third Party Witness Testing.

Din Rail Mounting Plug-gable Relay 20,000,000 Mechanical operations minimum. 50,000 Electrical operations minimum. Operating Temperature: 0 to 50 degree Celsius. Storage Temperature: -10 to 60 degree Celsius. Relative Humidity: 5 to 85% RH Relay ON Indication: Green color LED. Relay Protection Method: Freewheeling Diode. Designation: Designation plate screwed to the PCB for Labeling purpose.

Ordering Type : RP230A08-1CO-M Din Rail Mounting Solderable Relay 10,000,000 Mechanical operations minimum. 50,000 Electrical operations minimum. Operating Temperature : 0 to 50 degree Celsius Storage Temperature : -10 to 60 degree Celsius Relative Humidity : 5 to 95 % RH Relay ON Indication : Green color LED Relay Protection Method : NA Designation : Designation plate screwed to the PCB for labeling purpose

Operating Temperature: 0 to 60 degree Celsius Storage Temperature: -10 to 60 degree Celsius Relative Humidity : 5 to 90% RH Relay ON Indication: Green Color LED Relay Protection Method: Freewheeling Diode Designation: Designation plate screwed to the PCB for Labeling purpose. Din Rail Mounting Pluggable Relay 10,000,000 Mechanical operations minimum 60,000 Electrical operations minimum.

Operating Temperature: 0 to 60 degree Celsius Storage Temperature: -10 to 60 degree Celsius Relative Humidity : 5 to 90% RH Relay ON Indication: Green Color LED Relay Protection Method: Freewheeling Diode Designation: Designation plate screwed to the PCB for Labeling purpose. Din Rail Mounting Pluggable Relay 10,000,000 Mechanical operations minimum 60,000 Electrical operations minimum.

Features: ■ Two relays i.e., Start and Stop are provided with LED Indicators. ■ Reverse Battery protection ■ +Ve/-Ve Switching mode Specifications: ■ Relay Total Qty:- 2 Nos ■ Supply Voltage : 24VDC/12VDC ■ Size : 89X82X65 mm Back EMF protection. Relay Specification: ■ Relay Contact: 12VDC:-70Amps Max 24VDC:- 35Amp Max

To be fitted on roof of the panel. Canopy provides good ventilation& solves panel heat dissipation issue effectively. • Single Canopy with Dual (redundant Fan) installation. • Dual power separate incomer provision to get redundancy of the FAN. • Reverse flow Protection. • Fan airflow switch installation Provision. • Less Noise Level (from 35 to 65 dB). • Unique design for 180m³/Hr to 725m³/Hr airflow rate. • Easy to change Fan as per requirement. • Three piece design for ease of maintenance. • IP 54 certified (it may vary based on Cabinet IP rating). • Filers are provided for easy maintenance and that is IP 54 Certified. • Cabinet Roof Mounting flexibility (it may not influence internal component, which has installed inside the cabinet).

Two Input One Output Diode Module Din Rail Mounting, Redundant Module “OR”ing Module No of Channel: 1 Channel ( 2 input , 1 output diode module ) Diode Type: Stud Mounting. No. of Diode: Two Input current per Channel: 10 Amp PIV: 2000 Volt Terminal Connection: Screw terminal, 0.25²mm to 2.5²mm conductor Terminal Markings: Output ends are brought to the top row of PCB Mounted terminals marked as K. : Input ends are brought to the top row of PCB Mounted terminals marked as A1, A2.

Operating Temperature: 0 to 50 degree Celsius Storage Temperature: -10 to 60 degree Celsius Relative Humidity: 5 to 95% RH Relay ON Indication: Green Color Led Relay Protection Method: Freewheeling Diode Fuse Link: A glass fuse link provided at pole of each Relay Fuse Blow Indication: Each Fuse in path of pole is provided with red LED indicates Fuse Blown Indication Fuse Rating: 5 Ampere Designation: Designation plate screwed to the PCB for labeling

Design:- As per customer requirement

PDB Panels are used for Electric Power Distribution, Fault Protection and Monitoring of different Electrical Systems. It usually consists of Incomer ACB/MCCB, Switch Fuse Unit (SFU), ELCB, MCCB, MCB etc. Any Electrical Systems containing Inductive & Capacitive Loads consumes both Active and Reactive Power.